Treutlein 65 – 2017Spain
Treutlein 65 General Information
The Treutlein 65 is a sailing catamaran has been built in full carbon sandwich construction using vacuum-infusion technology. The design is based on the TAG 60 of well- known designer Greg Young which has been modified to comply with the owner’s individual requirements regarding performance, seaworthiness and structural integrity. The modifications have been developed in agreement with the designer and structural engineers.
During the entire production process the owner did not compromise quality, which can be proved in each detail.
The sailing catamaran “EOS” applied for CE-certification in design category A.
A recreational craft given design category A is considered to be designed for winds that may exceed wind force 8 (Beaufort scale) and significant wave height of 4 m and above but excluding abnormal conditions, such as storm, violent storm, hurricane, tornado and extreme sea conditions or rogue waves.
Hull and Superstructure
Hull and bulkheads are built in full carbon sandwich construction with Corecell foam core using vacuum infusion technology. Even the bonding laminates were applied with vacuum infusion. Lamination works were performed following highest boatbuilding standard. Laminate layup is visible on most of the inside surfaces, structural members can be perfectly accessed.
Hulls provide forward and aft crash boxes for additional safety in case of collision The outer skin is spray-coated with Alexseal grey colour in professional quality.
Deck and Superstructure
Deck and Superstructure are also built in full carbon sandwich with Corecell foam core using vacuum infusion.
Basic idea for the construction was to keep the structure as continuous as possible. This can be seen at the continuous main bulkhead, or at the main deck, that continues in one part as work top in the galley, which causes minor restrictions for the interior on one hand, but allows a maximum stiffness without additional weight.
Deck and superstructure are spray-coated with Alexseal white colour in professional quality. The windows are individually shaped and manufactured in coloured laminated safety-glass. All deck hatches are Lewmar flush carbon versions equipped with solar fans.
Working-deck and cockpit are covered with cork flooring
The entire interior follows the hull structure almost without hidden parts. Structural members of the yacht are visible, which creates light and technical interior without any covers and just a few additional furniture. Most of the surfaces are either high gloss carbon laminate, or white coated, only a few areas are covered with textile fabric.
The U-form pantry on port side is fully equipped with tree fridges, deep freezer, double sink, induction with 4 plates, microwave, galley extractor hood and espresso machine. Work top with high gloss full carbon surface.
Salon on starboard side with large sofa and carbon dining table. The large flat screen TV is pivot-mounted and retractable stored in the ceiling, it can optionally be turned either to the salon or to the cockpit.
Chart table with navigation instruments, computer and large daybed are situated in front of the main bulkhead under the windshield and can be accessed from port hull.
The cockpit is separated from the salon by a large sliding door and offers a large C-shape sofa framing a carbon table with integrated plancha, grill and induction-field. A full flexible protective enclosure with windows provides shelter from wind and rain.
The port hull includes an aft double cabin separated by a sliding door with storage and desk area midship, as well as a bathroom with shower and carbon toilet in the front.
The starboard hull provides a double cabin separated by a sliding door in the aft, a day toilet midship and a double cabin with two single beds, storage, a bathroom with carbon toilet and shower in the front.
The bow peaks provide storage for fenders and mooring lines as well as a Bauer diving compressor on port side and a carbon rack for three diving cylinders on starboard side. Bow thrusters (2.5 HP each) and holding tanks are also installed in this compartment. Access to the bow peaks effects on high grade carbon ladders with wooden inlays.
The engine rooms on the aft end of the hulls can be accessed from the cockpit with carbon stairs and from the transom stairs.
All Mattresses and cushions are found almost as new.
Complete set of electronics B&G with Sonar, Plotter, AIS, Radar and VHF and three multi- purpose screens can be found on helm-stations and chart table.
Two parallel working autopilots are installed.
A full size Apple computer is available on the chart-table.
The entertainment system contains components selected from high quality brands as listed below:
One large telescopic and pivot mounted flat screen, optionally visible from salon or cockpit.
Three flat screens on supports in the cabins.
Radio/ CD CLARION with BOSE speakers in salon and cockpit. Antenna internet with G4 router.
TV Antenna satellite KVH.
The entire technical equipment is selected from well-known brands and high quality.
Air conditioning is not required, as the accommodation does not heat up due to constructive details like missing hatches in the rooftop and vertical cabin windows.
The normal electrical consumption can be covered by 21 solar panels with approximate capacity of 3000 W. Additionally the boat is equipped with a generator FISCHER PANDA 8500.
The service battery capacity consists of 4 Lithium batteries 180A/ 24V, additionally separate starter batteries for engines and generator.
The engines, Type YANMAR SD 60 with 75 HP are fitted with GORI 3 blade folding propellers. Double filtration system and fire-fighting system provide additional safety.
Fuel is stored in 6 polyurethane tanks with 1400 litres capacity in total, additionally two day tanks with 120 litres in total.
Freshwater capacity is 300 litres in total in two polyurethane tanks.
3 holding tanks are provided in the fore peaks and central in the starboard hull which can be discharged by gravity.
One deck shower with cold and hot water is installed on aft transom.
The Aquatech watermaker has a capacity of 160 litres per hour. Operating time approximately 2 hours.
Water can be heated electrically, or by heat exchanging device from the engines. A small washing machine (3kg) is installed in the port hull.
Each compartment can be drained with electrical or manual bilge pumping system. Lightning protection system is installed.
Without exception exterior and interior lights are LED, red courtesy lights for the night.
Natural and solar driven ventilation is provided in the entire boat.
Various AC and USB-sockets are provided all over the yacht.
Wiring and installations are carried out according to good workmanship and state of technology.
Accessibility for maintenance or replacement has been considered in detail.
Rigg and Sails
The rigg consists of a rotating 24 m Hallspars carbon mast with a 9 m carbon park avenue boom with zipped lazy bag and aramid rigging.
Complete running rigging is Dynema.
Sails are made from Doyle Sails in high performance “Stratis” material produced in 2017.
Following sails are on board:
- Square head Main sail 150 sqm with Doyle smart system
- Self-tacking Headsail 65 sqm, on furler
- Self-tacking Staysail 32 sqm, on furler
- Stormsail 25 sqm
- Code zero 150 sqm
- Gennaker 175 sqm on drum on bowsprit
Asymmetrical centreboards with electrical control. Centreboards can be adjusted under load.
Protected helmstations with seat and full set of electronic instruments on each side with access to the halyards situated close to the helmstation.
The entire Deck equipment is competently selected from high quality brands in adequate dimensions.
Two electric winches, ANTAL 70XT, titan racing, 3-speed, positioned both sides for the halyards.
Two manual ANTAL 66XT for the mainsheet are mounted at cockpit and two manual ANTAL 66XT for gennaker and tender lifting at aft end of the hulls.
One manual winch forward for self-tacking rail and one manual winch at the mast.
Self-tacking rail in front of the mast allows comfortable short-hand-sailing.
Mainsheet traveller on aft beam provides maximum range for sail-adjustment.
Retractable mooring cleats in titan are minimizing the hazard of catching sheets.
Carbon stanchions with dyneema guardrails are offering required safety on deck with minimum weight.
LEWMAR electric windlass with remote control installed under the windshield with integrated flushing device and internal access through chart table, anchor roller on central beam.
Carbon davits for the tender are mounted on the aft end of the platform and can be operated by the aft winches.
Tender Highfield, RIB, 4,20 m with outboard Yamaha 25 HP in very good condition fits perfectly to the carbon davits on aft end of the platform and provides suitable performance.
Coppercoat Antifouling six layers application in October 2017.
Life-raft for 6 persons.
Anchor 60 kg stainless steel with 70 m stainless steel chain.
Removable carbon gangway for boarding.
10 inflatable fenders with fender-socks.
Various spare parts.
Call Daniel Ashforth on+356 9950 2625